Please allow a 12 week lead time for shipping.

Field Stone Walls

Field stone walls have a timeless charm—evoking warmth, character, and nostalgia. Whether in a cozy living room or a modern space, they elevate any interior style.
Traditionally, installing a field stone wall was a costly and complex undertaking. But that is changing now. You can achieve the look and texture of authentic, aged stone walls in just a few days, with only adding about one inch to the wall.

How is it sold?

The panels are sold in boxes with 4 panel per box and each panel measures 14” high by 18” wide and each panel is 1.75 square feet. To figure the square footage you would need, you would use the formula below. Each box of 4 panels will cover 7 square feet. Price includes shipping.

Price per panel $43.75 ($25.00 per square foot)

Price per box $175.00 (4 square feet) (price includes shipping, ships with UPS ground)

PLEASE NOTE: These panels with the final mortar applied to them weight approximately 8 lbs. If you are installing this product on something other than a concrete slab, please consider this weight that will be added to your floor system. Feel free to call us at 518-655-0126 if you would like to know the total weight of wall you intend to install.

How many panels do I need for my project?

You can call us at 518-655-0126 to assist you in determining the quantity of panels that you need. To determine the amount of panels you would need to purchase for your project you would use the following formula.

1.   Height of wall____(inches) x the length of wall ____(inches) = total square inches.____

2.   Then divide the total square inches____ by 144 and you get your total square feet of your wall.

3.   For the amount of boxes you would need to order, each box has 7 square feet in it, so divide the number of square feet you need by 7 and that is the number of boxes to order. If you need 8 or more boxes, you would order a pallet that consists of 8 boxes (56 square feet).

Example of doing just one wall in a room with no door and one window: 96” high wall x 120” long = 11,520 divided by 144 = 80 square feet. So you would need 80 square feet

You may want to add a little extra for waste, typically 5% to 10%. If there are many doors and windows, you can deduct those areas since they will not be paneled.

What will I get?

14” x 18” concrete panels

Sand mortar mix with mixing instructions is included in the cost and we give you the amount you should need based on the square footage you have purchased. The color of the mortar is the color shown in the photographs above.

How is it installed?

Just like any panel, it is applied to the wall with a latex fortified thinset. Once the thinset sets up after 24 hours you can apply your mortar to fill in the joints between the tiles. See our how to install video for the steps to install coming to our “Installs” page.

What else would I need to buy?

If you are planning on doing the project yourself, you would need to buy a latex fortified tile thinset. You would be applying the thinset at about an 1/8” thickness. The bag of thinset should tell you the square footage that it will cover for that thickness.

• 50 lbs Latex polymer fortified thinset

• Tile sponges (at least 2)

• 5 gallon buckets (at least 2)

• 1/4” x 1/4” notched tile trowel

• 6 mill plastic to cover your floor

• 2” wide blue tape

These panels cannot be used for floor tiles as they are too thin.

Interior use only.